Ghost 2 Immobiliser Installation
The ghost 2 immobiliser installation is a straightforward and effective method to safeguard your vehicle from theft. It is directly connected to the CAN network of your vehicle and is almost undetectable.
Identify a constant source of power as well as a point of grounding. It is vital to have these wires properly shielded to avoid electrical shorts.
Prevents theft
The Ghost 2 Immobiliser uses a unique PIN code sequence that's created by using the existing electronic buttons on your steering wheel or center console to ensure that only you are able to start your vehicle. Even if thieves are able to copy your keys or hack into your car's system, they will not be able start the vehicle. It's also quiet and inaccessible to anyone trying to use it therefore you can be confident that nobody will ever realize that you've added an extra layer of security.
ghost vehicle immobiliser helps in preventing theft since it can disable the engine of your car even if the thief manages to get inside. This is accomplished through the use of an additional device, called the Shadow that connects to your car's CAN data network and doesn't communicate via radio frequency, which makes it difficult for thieves to track or alter. The Shadow can also be connected to your vehicle's tracking/paging system, allowing you to monitor its movements. It has an output which can be used to sound the siren if someone attempts to take it.
It is crucial to work in a well-lit area when working with wiring, to help you identify the correct wires and avoid any accidental disconnections or short circuits. It is also essential to double-check and test connections, and to shield the wiring to shield it from the elements. It is also recommended to use cable tie-ups to bundle and secure the wires, which will enhance their appearance and reduce any possibility of them getting ripped off in the course of driving.
It's also a good idea to mark the CAN H and L wires with labels or tape. A misidentification of their location could cause a surge of power that damages the immobiliser. Multimeters can be used to check that the power source and grounding points provide a constant 12V and a solid connection.
Simple to use
Ghost immobilisers will help keep your vehicle secure from theft. It can be connected with an iPhone application to make it easy to manage and monitoring. The app will alert you in the event that your vehicle has been tampered with. ghost vehicle immobiliser can also assist you to locate your car in the event that it is stolen.
The Ghost immobiliser is operated without any special equipment. It's linked to your vehicle's CAN system and programmed with a unique PIN code of your choice. It can be activated by pressing the series button on your dashboard, steering wheel, or the WeCar application. The code has to be entered to turn on the engine, so thieves cannot just turn on your vehicle and leave.
Installing a ghost immobiliser is an easy process, however it's important to follow the instructions carefully to ensure that it is a seamless integration into your vehicle's existing systems. The first step is to remove the battery. This will prevent accidental airbag deployment and ensure security. It's also important to work in a well-lit area to make precise connections and avoid mistakes. To ensure a strong and solid connection, it's essential to use connectors of high-quality or the correct method of soldering.
The CAN H wire as well as the CAN L wire are required to connect your Ghost immobiliser to your vehicle's wiring. Utilizing a diagram of the wiring in your vehicle to identify these wires, find a suitable place to connect them. Mark these wires with tape or labels to make them easier to recognize during installation.
Once the connections are made, it's a good idea to test the immobiliser to be sure that it is working properly. It's also recommended to test the Transport Mode, which disables the Ghost system and lets you temporarily disable your security features. This is especially useful in situations like servicing or transportation of vehicles. This feature is particularly useful if you have an older vehicle that requires its battery to be isolated for servicing.
Low-profile
A ghost immobiliser is used to deter theft from keyless entry vehicles. It works by intercepting the signal from your vehicle's original remote and creating an obstruction that thieves can't break through without the correct PIN code. It's a safe and discrete method of protecting your vehicle, and insurance companies even suggest it to lower monthly costs. It is a low-profile, hidden system that is located within the buttons of your car. It does not have LED indicators, making it virtually undetectable by thieves.
Contrary to other security systems like the Ghost immobiliser is linked to your vehicle's CAN data network instead of the key fob. This means that thieves will not be able to identify or disable the device through cutting wires and is impervious to tampering. This makes it more difficult to steal your car, and is also an excellent option for older vehicles that aren't equipped with a keyless entry system.
The installation of a ghost immobiliser may be completed by an expert or you can do it yourself using the right equipment and materials. You'll need a few basic hand tools, a multimeter to check electrical values, as well as insulation tape or cable ties to make sure that your connections are secure well-insulated. You should also remove your battery prior to starting it, and ensure that all wiring is properly wrapped and insulated to avoid tampering from thieves.
You can request an establishment in your area to install your immobiliser if are not comfortable doing it yourself. They'll handle everything from the initial inspection until installing the device, and they'll provide a warranty if anything goes wrong. They can answer any questions regarding the immobiliser, and help you determine if it's the ideal fit for your vehicle.
The Autowatch Ghost 2 is a intelligent immobiliser that connects directly with your car's ECU. This protects against hacking and key cloning attacks that are typical in modern vehicles. It's TASSA certified and provides superior security against theft So you can rest sure that your vehicle is secure while driving it.
TASSA verified
The Ghost immobiliser system is one of the most effective ways to protect your vehicle from theft. It connects to the car's CAN data network and uses it to prevent the engine from beginning without a unique PIN code. The system is not detected by thieves which makes it a fantastic alternative to an alarm for your car. You can change your PIN code at anytime and only you know it. This guarantees the security of your vehicle.
Installers TASSA certified will install the Ghost system in your office or home within a couple of hours. They will also give you owner's guides, installation documents and a no-cost emergency card. They will also give you a a thorough demonstration of the device and ensure that you are happy with their service before they leave.
Like other immobilisers Ghost can connect directly to your vehicle's CAN data network. This allows it to be installed without cutting wires. It's also quiet and is therefore difficult for thieves to identify. The system comes with an individual and changeable PIN code, which you enter by pressing buttons on the dashboard or the steering wheel. This prevents anyone else from starting your car, even if they possess the key fobs.
If you're ready to install a ghost 2 immobiliser first, you must begin by disconnecting the battery. This will avoid any airbag deployments that happen accidentally or short circuits that may occur during the process. Once the battery has been disconnected, it's vital to adhere to the user's manual's instructions for connecting the immobiliser. Use online resources to find more information specific to your model.
Once you have completed the process, check the immobiliser to make sure that it is working properly. Enter the PIN code into the vehicle and then try to start it. After doing this, you should regularly perform regular tests to make sure that the immobiliser is working correctly. This will allow you to identify any issues early so you can resolve them quickly.